 |
 |
| |
| |
Although IRD Mechanalysis Inc. of Columbus Ohio USA and Chester England are now closed, a selection of the excellent products it carved its name world-wide continue to be made in India. These have been modernised but made to the same or better standards that IRD was respected for globally.
Mechanalysis India Ltd (MIL) made a wide range of IRD products under license as a joint venture company. When the mother organisation was acquired and closed down, it was contractually agreed that MIL could continue to manufacture and distribute under the original IRD brand even though MIL owns the Registered Trade Mark of IRD®. However, since there was some confusion in the Indian market we decided to use Mechanalysis India Limited (MIL) as the brand name and prefix all products with MIL, e.g. IRD model 306 became MIL306 etc.
Mechanalysis has also registered and now owns the IRD® brand in India and may at some future time manufacture under that brand name as appropriate.
As a manufacturing system integrator MIL is certified to ISO9001:2008 and currently manufactures the former IRD products listed below. It has, over the years, considerably updated them using the latest components with higher precision and improved reliability but maintaining the same functionality. The company will continue to enhance the packaging of its products to further improved sustainability. It is worth noting that the products listed have been ‘hardened’ to survive the severe climatic and power conditions prevailing in India. All MIL products are calibrated to traceable National Standards.
Prices are Ex Works unpacked in USD. Many products are available ex stock. Contact ceopa@mechanalysisindia.com for delivery details. For OEMs ordering sensors in volumes of over 10 units will enjoy a discount of 10%, between 11-20 15% discount, over 21 units 20% discount off the listed price.
The MIL range of former IRD products are given below but a wider range can be seen on the MIL’s main product page.
|
306 |
30601 |
MIL306 |
M30601 |
Portable vibration meter measures in velocity & displacement with analog display. Can be supplied in English units. Complete with standard accessories including MIL544 inductive velocity sensor. |
$891.00 |
544 |
4526 |
MIL544 |
M45260 |
Sensor Inductive Velocity, model MIL544, Off-line measurements, 14-1 KHz, 8% Sensitivity, 42.52 mV/mm/s, 260DegC, Top Exit, Mil 2 Pin Connector, 1/4"-28UNF Female Mounting Thread, with National Traceable Cal. Cert. |
$548.00 |
544B |
12083 |
MIL544B |
M12083 |
Sensor Inductive Velocity, model MIL544B, On-line measurements, Round Base, 14-1 KHz, 8% Sensitivity, 42.52 mV/mm/s, Class1 Div2 Hazardous Area, 260DegC, Top Exit, Mil 2 Pin Connector, 1/4"-28UNF Female Mounting Thread, with National Traceable Cal. Cert. |
$666.00 |
544M |
9712 |
MIL544M |
M97120 |
Sensor Inductive Velocity, model MIL544M, On-line measurements, Square Base, 14-1 KHz, 8% Sensitivity, 42.52 mV/mm/s, 260DegC, Class1 Div2 Hazardous Area, Top Exit, Mil 2 Pin Connector, Mounting on 4 holes 7.15mm Dia. on 2 × 2 centres , with National Traceable Cal. Cert. |
$695.00 |
544M |
|
MIL544M |
M97122 |
Sensor Inductive Velocity, model MIL544M, Premium Specification, On-line measurements, Square Base, 14-1 KHz, 5% Sensitivity, 42.52 mV/mm/s, 260DegC, Class1 Div2 Hazardous Area, Top Exit, Mil 2 Pin Connector, Mounting on 4 holes 7.15mm Dia. on 2 × 2 centres, NPC specification with National Traceable Cal. Cert. |
$830.00 |
546DP |
11194 |
MIL546DP |
M11194 |
Sensor Inductive Velocity, model MIL546DP, Rotor Balancing Applications, Direct Prod, 0-2.5 KHz, 8% Sensitivity, 42.52 mV/mm/s, Horizontal Exit, 2-pin equivalent to MS-3102A-10SL-4P , with National Traceable Cal. Cert. |
$886.00 |
810/1 |
8110m |
MIL811 |
M81101 |
The serious Vibration Analysts meter. Analog moving coil display for machinery assessment under fluctuating conditions. Measures in velocity, displacement, acceleration & spike energy with ISO Filter. Can be supplied in English units. Complete with standard accessories. |
$2344.00 |
970i |
|
MIL970i |
M97000 |
Accelerometer equivalent to IRD model 970i, suitable for IRD838, 885, 890, dataPAC etc, 50 mV/g, 5-3.0 kHz, top exit Mil 4 Pin Connector, 1/4"-28UNF Female Mounting Thread with National Traceable Cal. Cert. |
$335.00 |
1224 |
1224 |
MIL1224 |
M12241 |
Monitor Protection Single Channel with Analog Display. Input from MIL544M Velocity sensor, 0-250 and 0-750 Microns Pk-Pk Displacement Readout, 4-20 mA non-isolated output. |
$748.00 |
1225 |
1225 |
MIL1225 |
M12251 |
Monitor Protection Single Channel with Analog Display. Input from MIL544M Velocity sensor, 0-25 and 0-75 mm/sec Pk Velocity Readout, 4-20 mA non-isolated output. |
$748.00 |
Unicel II |
|
MIL8700 |
Various |
The MIL8700 is a 19” Rack machinery protection monitor is API670 compliant. It is factory configurable for vibration and turbine supervisory instrumentation requirements. It comes with Analog or Digital displays. It is an ideal replacement for Unicel I with over 18 years of trouble free service. |
Factory Quote |
5815 |
|
MIL7300 |
Various |
The MIL7300 is a 19” Rack machinery protection transmitter with up to 16 channels of 4-20mA output. It is factory configurable for vibration and turbine supervisory instrumentation requirements. It’s architecture is based on MIL8700 and Unicell II monitors. |
Factory Quote |
5915 |
|
MIL8800 |
Various |
A modern replacement for IRD5915 VDU 19” monitor. The MIL8800 is a 19” 5U Rack machinery protection monitor that caters up to 7 Dual Channel modules. It has the complete range of VMS or TSI module options that have Dual Channel Bar-Graph with bright LCD and Digital display and Warning, Alarm & Startup LEDs. Complete with individual SMPS 90-270V AC, 50/60Hz,1Ø. . Programmable via the front key pad to select: Sensor Type, Range, Units, Sensitivity, HP/LP Filters, A/T level & time delay, FS/NFS, TX Fail indication, Start-up protection per channel; Trip Bypass. Outputs: TWF signals & Ref Phase at front BNC sockets, Alarm /Trip LED's & Relays, Over Range, TX Fail Relay, Isolated 4-20mA output per channel; RS485/MODBUS connectivity. |
Factory Quote |
6600 |
|
MIL8800 |
Various |
As described above. A perfect economic upgrade for the obsolete IRD6600 monitor with similar functionality look and feel. |
Factory Quote |
|
| |
Mechanalysis also services most IRD products and maintains a wide range of spares. Contact our National Service Centre for details at service@mechanalysisindia.com
IRD® Is a registered trademark of Mechanalysis (India) Ltd |
| |
|
|
| |
|
|
|
